Inheritance diagram for cpart_pbuttons:

Collaboration diagram for cpart_pbuttons:

[legend]

Public Member Functions
std::string	GetAboutInfo (void) override
	Return the about information of part.

	cpart_pbuttons (const unsigned x, const unsigned y, const char name, const char type, board *pboard_, const int id_)

void	DrawOutput (const unsigned int index) override
	Called to draw every output.

void	PreProcess (void) override
	Called every start of CPU process.

void	Process (void) override
	Called every CPU step.

void	Reset (void) override
	Reset part status.

void	OnMouseButtonPress (unsigned int inputId, unsigned int button, unsigned int x, unsigned int y, unsigned int state) override
	Event handler on the part.

void	OnMouseButtonRelease (unsigned int inputId, unsigned int button, unsigned int x, unsigned int y, unsigned int state) override
	Event handler on the part.

void	ConfigurePropertiesWindow (void) override
	Called to configure the properties window.

void	ReadPropertiesWindow (void) override
	Called when properties window close.

void	LoadPartImage (void) override
	Load Part Image.

std::string	WritePreferences (void) override
	Called to save part preferences in configuration file.

void	ReadPreferences (std::string value) override
	Called whe configuration file load preferences.

unsigned short	GetInputId (char *name) override
	return the input ids numbers of names used in input map

unsigned short	GetOutputId (char *name) override
	return the output ids numbers of names used in output map

void	SpinChange (const char *controlname, int value) override
	Used by properties window spin.

Public Member Functions inherited from part
std::string	GetName (void)
	Return the name of part.

virtual std::string	GetHelpURL (void)
	Return the help url of part.

void	Draw (void)
	Called ever 100ms to draw part.

virtual void	PostProcess (void)
	Called every end of CPU process.

virtual std::string	GetPictureFileName (void)
	Return the filename of part picture.

virtual std::string	GetMapFile (void)
	Return the filename of part picture map.

virtual std::string	GetPropertiesWindowFile (void)
	Return the filename of properties window XML file.

int	GetInputCount (void)
	Get part input count.

input_t *	GetInput (int n)
	Get part input.

int	GetOutputCount (void)
	Get part output count.

output_t *	GetOutput (int n)
	Get part input.

virtual void	Stop (void)
	Stop part simulation.

void	EvMouseButtonPress (unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Event handler on the part.

void	EvMouseButtonRelease (unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Event handler on the part.

void	EvMouseMove (unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Event handler on the part.

virtual void	OnMouseMove (unsigned int inputId, unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Event handler on the part.

virtual void	EvKeyPress (unsigned int key, unsigned int mask)
	Event handler on the part.

virtual void	EvKeyRelease (unsigned int key, unsigned int mask)
	Event handler on the part.

virtual void	ComboChange (const char *controlname, std::string value)
	Used by properties window combos.

virtual void	ButtonEvent (const char *controlname, unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Used by windows of parts.

virtual void	KeyEvent (const char *controlname, unsigned int keysym, unsigned int ukeysym, unsigned int state)
	Used by windows of parts.

virtual void	Event (const char *controlname)
	Used by windows of parts.

virtual void	filedialog_EvOnClose (int retId)
	Used by properties window filedialogs.

	part (const unsigned x, const unsigned y, const char name, const char type, board *pboard_, const int id_, const int fsize=8)
	Called once on part creation.

void	Init (void)
	Called once on part initialization.

virtual void	PostInit (void)
	Called once on part after initialization.

virtual	~part (void)
	Called once on part destruction.

int	GetBitmap (void)
	Return the Bitmap of part.

int	GetX (void)
	Return X position of part.

int	GetY (void)
	Return Y position of part.

void	SetX (int x)
	Set X position of part.

void	SetY (int y)
	Set Y position of part.

unsigned int	GetWidth (void)
	Return width of part.

unsigned int	GetHeight (void)
	Return height of part.

int	PointInside (int x, int y)
	Return if point x,y is inside of part.

void	RotateCoords (unsigned int x, unsigned int y)
	Return coords x y rotated by orientation.

int	GetOrientation (void)
	Return the orientation to draw.

virtual void	SetOrientation (int orientation)
	Set the orientation to draw.

float	GetScale (void)
	Return the orientation to draw.

virtual void	SetScale (double scale)
	Set the orientation to draw.

int	GetId (void)
	Get the part ID.

void	SetId (int id_)
	Set the part ID.

unsigned char	GetUpdate (void)
	Return if part need Draw update.

void	SetUpdate (unsigned char upd)
	Set part to Draw update.

int	GetAlwaysUpdate (void)
	Return if part need to be update every clock cycle.

void	SetAlwaysUpdate (int sau)
	Set if part need to be update every clock cycle.

const int	GetPCWCount (void)

const PCWProp *	GetPCWProperties (void)

const int	GetPinCount (void)

unsigned char *	GetPins (void)

const int	GetPinCtrlCount (void)

const unsigned char *	GetPinsCtrl (void)

Private Member Functions
void	RegisterRemoteControl (void) override
	Register remote control variables.

void	ChangeSize (const unsigned int sz)

Private Attributes
unsigned char	active

unsigned char	output_pins [8]

unsigned char	output_value [8]

SWBounce_t	bounce

unsigned char	mode

int	OWidth

int	OHeight

int	xoff

unsigned int	Size

Additional Inherited Members
Protected Member Functions inherited from part
void	ReadMaps (void)
	read maps

int	PointInside (int x, int y, input_t input)
	Return if point x,y is inside of input.

void	SetPCWProperties (const PCWProp *pcwprop)

void	SetPCWComboWithPinNames (const char *combo_name, const unsigned char pin)

unsigned char	GetPWCComboSelectedPin (const char *combo_name)

Protected Attributes inherited from part
int	id
	part ID

input_t	input [MAX_IDS]
	input map elements

input_t *	input_ids [MAX_IDS]
	input map elements by id order

output_t	output [MAX_IDS]
	output map elements

output_t *	output_ids [MAX_IDS]
	output map elements by id order

int	inputc
	input map elements counter

int	outputc
	output map elements counter

unsigned int	Height
	Height of part.

unsigned int	Width
	Width of part.

int	X
	X position of part.

int	Y
	Y position of part.

int	BitmapId
	Internal Bitmap.

unsigned int	refresh
	redraw is needed

int	Orientation
	orientation to draw part

float	Scale
	scale to draw part

unsigned int	Update
	part need draw Update

int	always_update
	part need to be update every clock cycle

std::string	Type

int	PinCount

int	PinCtrlCount

unsigned char *	Pins

unsigned char *	PinsCtrl

board *	pboard

int	Fsize

Member Function Documentation

◆ ConfigurePropertiesWindow()

void cpart_pbuttons::ConfigurePropertiesWindow ( void )

overridevirtual

Called to configure the properties window.

Implements part.

Here is the call graph for this function:

◆ DrawOutput()

void cpart_pbuttons::DrawOutput ( const unsigned int index )

overridevirtual

Called to draw every output.

Implements part.

Here is the call graph for this function:

◆ GetAboutInfo()

std::string cpart_pbuttons::GetAboutInfo ( void )

inlineoverridevirtual

Return the about information of part.

Implements part.

◆ GetInputId()

unsigned short cpart_pbuttons::GetInputId ( char * name )

overridevirtual

return the input ids numbers of names used in input map

Implements part.

◆ GetOutputId()

unsigned short cpart_pbuttons::GetOutputId ( char * name )

overridevirtual

return the output ids numbers of names used in output map

Implements part.

◆ LoadPartImage()

void cpart_pbuttons::LoadPartImage ( void )

overridevirtual

Load Part Image.

Reimplemented from part.

Here is the call graph for this function:

◆ OnMouseButtonPress()

void cpart_pbuttons::OnMouseButtonPress	(	unsigned int	inputId,
		unsigned int	button,
		unsigned int	x,
		unsigned int	y,
		unsigned int	state
	)

overridevirtual

Event handler on the part.

Reimplemented from part.

◆ OnMouseButtonRelease()

void cpart_pbuttons::OnMouseButtonRelease	(	unsigned int	inputId,
		unsigned int	button,
		unsigned int	x,
		unsigned int	y,
		unsigned int	state
	)

overridevirtual

Event handler on the part.

Reimplemented from part.

◆ PreProcess()

void cpart_pbuttons::PreProcess ( void )

overridevirtual

Called every start of CPU process.

Reimplemented from part.

Here is the call graph for this function:

◆ Process()

void cpart_pbuttons::Process ( void )

overridevirtual

Called every CPU step.

Reimplemented from part.

◆ ReadPreferences()

void cpart_pbuttons::ReadPreferences ( std::string value )

overridevirtual

Called whe configuration file load preferences.

Implements part.

◆ ReadPropertiesWindow()

void cpart_pbuttons::ReadPropertiesWindow ( void )

overridevirtual

Called when properties window close.

Implements part.

◆ RegisterRemoteControl()

void cpart_pbuttons::RegisterRemoteControl ( void )

overrideprivatevirtual

Register remote control variables.

Reimplemented from part.

◆ Reset()

void cpart_pbuttons::Reset ( void )

overridevirtual

Reset part status.

Reimplemented from part.

◆ SpinChange()

void cpart_pbuttons::SpinChange	(	const char *	controlname,
		int	value
	)

overridevirtual

Used by properties window spin.

Reimplemented from part.

◆ WritePreferences()

std::string cpart_pbuttons::WritePreferences ( void )

overridevirtual

Called to save part preferences in configuration file.

Implements part.

The documentation for this class was generated from the following files:

src/parts/input_push_buttons.h
src/parts/input_push_buttons.cc

Public Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Member Function Documentation

◆ ConfigurePropertiesWindow()

◆ DrawOutput()

◆ GetAboutInfo()

◆ GetInputId()

◆ GetOutputId()

◆ LoadPartImage()

◆ OnMouseButtonPress()

◆ OnMouseButtonRelease()

◆ PreProcess()

◆ Process()

◆ ReadPreferences()

◆ ReadPropertiesWindow()

◆ RegisterRemoteControl()

◆ Reset()

◆ SpinChange()

◆ WritePreferences()