cboard_Arduino_Nano Class Reference

Inheritance diagram for cboard_Arduino_Nano:

Collaboration diagram for cboard_Arduino_Nano:

Public Member Functions
std::string	GetName (void) override
	Get board name registered in PICSimLab.
std::string	GetAboutInfo (void) override
	Return the about information of part.
void	WritePreferences (void) override
	Called to save board preferences in configuration file.
void	ReadPreferences (char *name, char *value) override
	Called whe configuration file load preferences.
Public Member Functions inherited from cboard_Arduino_Uno
std::string	GetName (void) override
	Get board name registered in PICSimLab.
std::string	GetAboutInfo (void) override
	Return the about information of part.
void	Draw (void) override
	Called ever 100ms to draw board.
void	Run_CPU (void) override
	Paralle thread called ever 100ms to run cpu code.
std::string	GetSupportedDevices (void) override
	Return a list of supported microcontrollers.
void	Reset (void) override
	Reset board status.
void	EvMouseButtonPress (unsigned int button, unsigned int x, unsigned int y, unsigned int state) override
	Event on the board.
void	EvMouseButtonRelease (unsigned int button, unsigned int x, unsigned int y, unsigned int state) override
	Event on the board.
void	EvKeyPress (unsigned int key, unsigned int mask) override
	Event on the board.
void	EvKeyRelease (unsigned int key, unsigned int mask) override
	Event on the board.
void	RefreshStatus (void) override
	Called ever 1s to refresh status.
void	WritePreferences (void) override
	Called to save board preferences in configuration file.
void	ReadPreferences (char *name, char *value) override
	Called whe configuration file load preferences.
unsigned short	GetInputId (char *name) override
	return the input ids numbers of names used in input map
unsigned short	GetOutputId (char *name) override
	return the output ids numbers of names used in output map
Public Member Functions inherited from bsim_simavr
int	DebugInit (int dtyppe) override
	Start debug support.
std::string	GetDebugName (void) override
	Get debug interface name.
void	DebugLoop (void) override
	debug step (pooling)
int	CpuInitialized (void) override
	return true if microcontroller is initialized
void	MSetSerial (const char *port) override
	Set serial port name to use.
int	MInit (const char *processor, const char *fname, float freq) override
	board microcontroller init
void	MEnd (void) override
	board microcontroller end
int	MGetArchitecture (void) override
	Return board microcontroller architecture.
int	MDumpMemory (const char *fname) override
	board microcontroller save non volatile memory to hex file
void	MEraseFlash (void) override
	board microcontroller erase flash memory (program)
void	MSetFreq (float freq) override
	board microcontroller set frequency
float	MGetFreq (void) override
	board microcontroller get frequency
void	MSetVCC (float vcc) override
	board microcontroller set vcc
float	MGetVCC (void) override
	board microcontroller get vcc
float	MGetInstClockFreq (void) override
	board microcontroller get cpu internal clock (in PIC frequency/4)
int	MGetPinCount (void) override
	board microcontroller pin count
std::string	MGetPinName (int pin) override
	board microcontroller pin name
void	MSetPin (int pin, unsigned char value) override
	board microcontroller set digital pin
void	MSetPinDOV (int pin, unsigned char ovalue) override
	board microcontroller set Default Open Value (external pull)
void	MSetAPin (int pin, float value) override
	board microcontroller set analog pin
unsigned char	MGetPin (int pin) override
	board microcontroller get digital pin value
const picpin *	MGetPinsValues (void) override
	board microcontroller get all pins list struct
void	MStep (void) override
	board microcontroller run one step
void	MStepResume (void) override
	board microcontroller run one or two steps to resume instruction
void	MReset (int flags) override
	board microcontroller reset
unsigned short *	DBGGetProcID_p (void) override
	board microcontroller get pointer to processor ID
unsigned int	DBGGetPC (void) override
	board microcontroller get PC
void	DBGSetPC (unsigned int pc) override
	board microcontroller set PC
unsigned char *	DBGGetRAM_p (void) override
	board microcontroller get RAM memory pointer
unsigned char *	DBGGetROM_p (void) override
	board microcontroller get ROM (FLASH) memory pointer
unsigned char *	DBGGetCONFIG_p (void) override
	board microcontroller get CONFIG memory pointer
unsigned char *	DBGGetID_p (void) override
	board microcontroller get internal IDS memory pointer
unsigned char *	DBGGetEEPROM_p (void) override
	board microcontroller get data EEPROM memory pointer
unsigned int	DBGGetRAMSize (void) override
	board microcontroller get RAM memory size
unsigned int	DBGGetROMSize (void) override
	board microcontroller get ROM (FLASH) memory size
unsigned int	DBGGetCONFIGSize (void) override
	board microcontroller get CONFIG memory size
unsigned int	DBGGetIDSize (void) override
	board microcontroller get internal IDS memory size
unsigned int	DBGGetEEPROM_Size (void) override
	board microcontroller get data EEPROM memory size
void	EndServers (void) override
	board servers shutdown
int	GetDefaultClock (void) override
	Get board default clock in MHz.
int	GetUARTRX (const int uart_num) override
	Return the UART N RX pin number.
int	GetUARTTX (const int uart_num) override
	Return the UART N TX pin number.
virtual void	UpdateHardware (void)
void	SerialSend (bitbang_uart_t *_bb_uart, const unsigned char value)
Public Member Functions inherited from board
virtual std::string	GetPictureFileName (void)
	Return the filename of board picture.
virtual std::string	GetMapFile (void)
	Return the filename of board picture map.
virtual void	EvMouseMove (unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Event on the board.
virtual void	EvOnShow (void)
	Event on the board.
virtual void	EvThreadRun (void)
	Event on the board.
virtual void	board_Event (const char *controlname)
	Called when window side controls are activated.
virtual void	board_ButtonEvent (const char *controlname, unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Called when window side controls are activated.
	board (void)
	Called once on board creation.
virtual	~board (void)
	Called once on board destruction.
void	SetUseOscilloscope (int uo)
	Enable/disable oscilloscope measurement.
void	SetUseSpareParts (int sp)
	Enable/disable spare parts.
int	GetUseOscilloscope (void)
	Get if oscilloscope is in use.
int	GetUseSpareParts (void)
	Get if spare parts is in use.
void	SetProcessorName (std::string proc)
	Set board processor.
std::string	GetProcessorName (void)
	Get board processor in use.
int	GetInputCount (void)
	Get board input count.
input_t *	GetInput (int n)
	Get board input.
int	GetOutputCount (void)
	Get board output count.
output_t *	GetOutput (int n)
	Get board input.
int	MGetClocksPerInstructions (void)
	board microcontroller get Clock pulses per instruction (in PIC equal to 4)
virtual unsigned int	DBGGetRAMLAWR (void)
	board microcontroller get last ram write address
virtual unsigned int	DBGGetRAMLARD (void)
	board microcontroller get last ram read address
unsigned char	CalcAngle (int i, int x, int y)
	Calc rotary potentiometer angle.
virtual void	SetScale (double scale)
	Set board draw scale.
double	GetScale (void)
	Get board draw scale.
std::string	GetDefaultProcessor (void)
	Get board default processor.
void	SetDefaultProcessor (std::string dproc)
	Set board default processor.
uint32_t	GetInstCounter (void)
	Get instruction counter.
uint32_t	GetInstCounter_us (const uint32_t start)
	Get elapsed time from instruction counter in us.
uint32_t	GetInstCounter_ms (const uint32_t start)
	Get elapsed time from instruction counter in us.
int	TimerRegister_us (const double micros, void(*Callback)(void *arg), void *arg)
	Register a new timer with time in us (default enabled)
int	TimerRegister_ms (const double miles, void(*Callback)(void *arg), void *arg)
	Register a new timer with time in ms (default enabled)
int	TimerUnregister (const int timer)
	Unregister timer.
int	TimerChange_us (const int timer, const double micros)
	Modify timer value with us.
int	TimerChange_ms (const int timer, const double miles)
	Modify timer value with us.
int	TimerSetState (const int timer, const int enabled)
	Enable or disable timer.
uint64_t	TimerGet_ns (const int timer)
	Get elapsed time from instruction counter in ns.
void	TimerUpdateFrequency (float freq)
	Update Timer counters on frequency change.
virtual void	IoLockAccess (void)
	Lock IO to others threads access.
virtual void	IoUnlockAccess (void)
	Unlock IO to others threads access.
virtual std::string	GetClkLabel (void)
	Return the description of clk label.

Additional Inherited Members
Static Public Member Functions inherited from bsim_simavr
static void	out_hook (struct avr_irq_t *irq, uint32_t value, void *param)
static void	ddr_hook (struct avr_irq_t *irq, uint32_t value, void *param)
Public Attributes inherited from bsim_simavr
usi_t	USI
Protected Member Functions inherited from bsim_simavr
void	pins_reset (void)
Protected Member Functions inherited from board
void	InstCounterInc (void)
	Increment the Intructions Counter.
void	ReadMaps (void)
	Read maps.
void	StartThread (void)
	Start parallel thread.
void	StopThread (void)
	Stop parallel thread.
Protected Attributes inherited from cboard_Arduino_Uno
int	LED_pin
int	PWM_pins [6]
Protected Attributes inherited from bsim_simavr
avr_t *	avr
avr_irq_t *	serial_irq [MAX_UART_COUNT]
picpin	pins [256]
avr_irq_t *	Write_stat_irq [100]
unsigned int	serialbaud [MAX_UART_COUNT]
float	serialexbaud [MAX_UART_COUNT]
int	avr_debug_type
serialfd_t	serialfd
bitbang_uart_t	bb_uart [MAX_UART_COUNT]
unsigned char *	eeprom
unsigned char	uart_config [MAX_UART_COUNT]
unsigned char	usart_count
unsigned int	UCSR_base [MAX_UART_COUNT]
int	pkg
Protected Attributes inherited from board
std::string	Proc
	Name of processor in use.
std::string	DProc
	Name of default board processor.
input_t	input [MAX_IDS]
	input map elements
input_t *	input_ids [MAX_IDS]
	input map elements by id order
output_t	output [MAX_IDS]
	output map elements
output_t *	output_ids [MAX_IDS]
	output map elements by id order
int	inputc
	input map elements counter
int	outputc
	output map elements counter
int	use_oscope
	use oscilloscope window
int	use_spare
	use spare parts window
unsigned char	p_RST
	board /RESET pin state
float	Scale

Member Function Documentation

GetAboutInfo()

std::string cboard_Arduino_Nano::GetAboutInfo ( void  )

inlineoverridevirtual

Return the about information of part.

Implements board.

GetName()

std::string cboard_Arduino_Nano::GetName ( void  )

inlineoverridevirtual

Get board name registered in PICSimLab.

Implements board.

ReadPreferences()

void cboard_Arduino_Nano::ReadPreferences ( char *  name, char *  value  )

overridevirtual

Called whe configuration file load preferences.

Reimplemented from board.

WritePreferences()

void cboard_Arduino_Nano::WritePreferences ( void  )

overridevirtual

Called to save board preferences in configuration file.

Reimplemented from board.

Here is the call graph for this function:

---

The documentation for this class was generated from the following files:

• src/boards/board_Arduino_Nano.h
• src/boards/board_Arduino_Nano.cc