bsim_ucsim Class Reference

Inheritance diagram for bsim_ucsim:

Collaboration diagram for bsim_ucsim:

Public Member Functions
int	DebugInit (int dtyppe) override
	Start debug support.
std::string	GetDebugName (void) override
	Get debug interface name.
void	DebugLoop (void) override
	debug step (pooling)
int	CpuInitialized (void) override
	return true if microcontroller is initialized
void	MSetSerial (const char *port) override
	Set serial port name to use.
int	MInit (const char *processor, const char *fname, float freq) override
	board microcontroller init
void	MEnd (void) override
	board microcontroller end
int	MGetArchitecture (void) override
	Return board microcontroller architecture.
int	MDumpMemory (const char *fname) override
	board microcontroller save non volatile memory to hex file
void	MEraseFlash (void) override
	board microcontroller erase flash memory (program)
void	MSetFreq (float freq) override
	board microcontroller set frequency
float	MGetFreq (void) override
	board microcontroller get frequency
void	MSetVCC (float vcc) override
	board microcontroller set vcc
float	MGetVCC (void) override
	board microcontroller get vcc
float	MGetInstClockFreq (void) override
	board microcontroller get cpu internal clock (in PIC frequency/4)
int	MGetPinCount (void) override
	board microcontroller pin count
std::string	MGetPinName (int pin) override
	board microcontroller pin name
void	MSetPin (int pin, unsigned char value) override
	board microcontroller set digital pin
void	MSetPinDOV (int pin, unsigned char ovalue) override
	board microcontroller set Default Open Value (external pull)
void	MSetAPin (int pin, float value) override
	board microcontroller set analog pin
unsigned char	MGetPin (int pin) override
	board microcontroller get digital pin value
const picpin *	MGetPinsValues (void) override
	board microcontroller get all pins list struct
void	MStep (void) override
	board microcontroller run one step
void	MStepResume (void) override
	board microcontroller run one or two steps to resume instruction
void	MReset (int flags) override
	board microcontroller reset
Public Member Functions inherited from board
virtual void	Draw (void)=0
	Called ever 100ms to draw board.
virtual void	Run_CPU (void)=0
	Paralle thread called ever 100ms to run cpu code.
virtual std::string	GetSupportedDevices (void)=0
	Return a list of supported microcontrollers.
virtual std::string	GetPictureFileName (void)
	Return the filename of board picture.
virtual std::string	GetMapFile (void)
	Return the filename of board picture map.
virtual void	Reset (void)=0
	Reset board status.
virtual void	EvMouseButtonPress (unsigned int button, unsigned int x, unsigned int y, unsigned int state)=0
	Event on the board.
virtual void	EvMouseButtonRelease (unsigned int button, unsigned int x, unsigned int y, unsigned int state)=0
	Event on the board.
virtual void	EvMouseMove (unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Event on the board.
virtual void	EvKeyPress (unsigned int key, unsigned int mask)=0
	Event on the board.
virtual void	EvKeyRelease (unsigned int key, unsigned int mask)=0
	Event on the board.
virtual void	EvOnShow (void)
	Event on the board.
virtual void	EvThreadRun (void)
	Event on the board.
virtual void	RefreshStatus (void)
	Called ever 1s to refresh status.
virtual void	WritePreferences (void)
	Called to save board preferences in configuration file.
virtual void	ReadPreferences (char *name, char *value)
	Called whe configuration file load preferences.
virtual unsigned short	GetInputId (char *name)=0
	return the input ids numbers of names used in input map
virtual unsigned short	GetOutputId (char *name)=0
	return the output ids numbers of names used in output map
virtual void	board_Event (const char *controlname)
	Called when window side controls are activated.
virtual void	board_ButtonEvent (const char *controlname, unsigned int button, unsigned int x, unsigned int y, unsigned int state)
	Called when window side controls are activated.
	board (void)
	Called once on board creation.
virtual	~board (void)
	Called once on board destruction.
void	SetUseOscilloscope (int uo)
	Enable/disable oscilloscope measurement.
void	SetUseSpareParts (int sp)
	Enable/disable spare parts.
int	GetUseOscilloscope (void)
	Get if oscilloscope is in use.
int	GetUseSpareParts (void)
	Get if spare parts is in use.
virtual std::string	GetName (void)=0
	Get board name registered in PICSimLab.
void	SetProcessorName (std::string proc)
	Set board processor.
std::string	GetProcessorName (void)
	Get board processor in use.
int	GetInputCount (void)
	Get board input count.
input_t *	GetInput (int n)
	Get board input.
int	GetOutputCount (void)
	Get board output count.
output_t *	GetOutput (int n)
	Get board input.
virtual std::string	GetAboutInfo (void)=0
	Return the about information of part.
virtual void	EndServers (void)
	board servers shutdown
int	MGetClocksPerInstructions (void)
	board microcontroller get Clock pulses per instruction (in PIC equal to 4)
virtual unsigned short *	DBGGetProcID_p (void)
	board microcontroller get pointer to processor ID
virtual unsigned int	DBGGetPC (void)
	board microcontroller get PC
virtual void	DBGSetPC (unsigned int pc)
	board microcontroller set PC
virtual unsigned char *	DBGGetRAM_p (void)
	board microcontroller get RAM memory pointer
virtual unsigned char *	DBGGetROM_p (void)
	board microcontroller get ROM (FLASH) memory pointer
virtual unsigned char *	DBGGetCONFIG_p (void)
	board microcontroller get CONFIG memory pointer
virtual unsigned char *	DBGGetID_p (void)
	board microcontroller get internal IDS memory pointer
virtual unsigned char *	DBGGetEEPROM_p (void)
	board microcontroller get data EEPROM memory pointer
virtual unsigned int	DBGGetRAMSize (void)
	board microcontroller get RAM memory size
virtual unsigned int	DBGGetROMSize (void)
	board microcontroller get ROM (FLASH) memory size
virtual unsigned int	DBGGetCONFIGSize (void)
	board microcontroller get CONFIG memory size
virtual unsigned int	DBGGetIDSize (void)
	board microcontroller get internal IDS memory size
virtual unsigned int	DBGGetEEPROM_Size (void)
	board microcontroller get data EEPROM memory size
virtual unsigned int	DBGGetRAMLAWR (void)
	board microcontroller get last ram write address
virtual unsigned int	DBGGetRAMLARD (void)
	board microcontroller get last ram read address
unsigned char	CalcAngle (int i, int x, int y)
	Calc rotary potentiometer angle.
virtual void	SetScale (double scale)
	Set board draw scale.
double	GetScale (void)
	Get board draw scale.
virtual int	GetDefaultClock (void)
	Get board default clock in MHz.
std::string	GetDefaultProcessor (void)
	Get board default processor.
void	SetDefaultProcessor (std::string dproc)
	Set board default processor.
uint32_t	GetInstCounter (void)
	Get instruction counter.
uint32_t	GetInstCounter_us (const uint32_t start)
	Get elapsed time from instruction counter in us.
uint32_t	GetInstCounter_ms (const uint32_t start)
	Get elapsed time from instruction counter in us.
int	TimerRegister_us (const double micros, void(*Callback)(void *arg), void *arg)
	Register a new timer with time in us (default enabled)
int	TimerRegister_ms (const double miles, void(*Callback)(void *arg), void *arg)
	Register a new timer with time in ms (default enabled)
int	TimerUnregister (const int timer)
	Unregister timer.
int	TimerChange_us (const int timer, const double micros)
	Modify timer value with us.
int	TimerChange_ms (const int timer, const double miles)
	Modify timer value with us.
int	TimerSetState (const int timer, const int enabled)
	Enable or disable timer.
uint64_t	TimerGet_ns (const int timer)
	Get elapsed time from instruction counter in ns.
void	TimerUpdateFrequency (float freq)
	Update Timer counters on frequency change.
virtual void	IoLockAccess (void)
	Lock IO to others threads access.
virtual void	IoUnlockAccess (void)
	Unlock IO to others threads access.
virtual int	GetUARTRX (const int uart_num)
	Return the UART N RX pin number.
virtual int	GetUARTTX (const int uart_num)
	Return the UART N TX pin number.
virtual std::string	GetClkLabel (void)
	Return the description of clk label.

Protected Member Functions
void	pins_reset (void)
Protected Member Functions inherited from board
virtual void	RegisterRemoteControl (void)
	Register remote control variables.
void	InstCounterInc (void)
	Increment the Intructions Counter.
void	ReadMaps (void)
	Read maps.
void	StartThread (void)
	Start parallel thread.
void	StopThread (void)
	Stop parallel thread.

Protected Attributes
picpin	pins [256]
unsigned int	serialbaud
float	serialexbaud
float	freq
int	serialfd
int	procid
unsigned short	ports [4]
Protected Attributes inherited from board
std::string	Proc
	Name of processor in use.
std::string	DProc
	Name of default board processor.
input_t	input [MAX_IDS]
	input map elements
input_t *	input_ids [MAX_IDS]
	input map elements by id order
output_t	output [MAX_IDS]
	output map elements
output_t *	output_ids [MAX_IDS]
	output map elements by id order
int	inputc
	input map elements counter
int	outputc
	output map elements counter
int	use_oscope
	use oscilloscope window
int	use_spare
	use spare parts window
unsigned char	p_RST
	board /RESET pin state
float	Scale

Member Function Documentation

CpuInitialized()

int bsim_ucsim::CpuInitialized ( void  )

overridevirtual

return true if microcontroller is initialized

Implements board.

DebugInit()

int bsim_ucsim::DebugInit ( int  dtyppe )

overridevirtual

Start debug support.

mplabxd_init (this, Window1.Get_debug_port ()) - 1;

Implements board.

DebugLoop()

void bsim_ucsim::DebugLoop ( void  )

overridevirtual

debug step (pooling)

Implements board.

GetDebugName()

std::string bsim_ucsim::GetDebugName ( void  )

inlineoverridevirtual

Get debug interface name.

Implements board.

MDumpMemory()

int bsim_ucsim::MDumpMemory ( const char *  fname )

overridevirtual

board microcontroller save non volatile memory to hex file

Implements board.

MEnd()

void bsim_ucsim::MEnd ( void  )

overridevirtual

board microcontroller end

Implements board.

MEraseFlash()

void bsim_ucsim::MEraseFlash ( void  )

overridevirtual

board microcontroller erase flash memory (program)

Implements board.

MGetArchitecture()

int bsim_ucsim::MGetArchitecture ( void  )

overridevirtual

Return board microcontroller architecture.

Implements board.

MGetFreq()

float bsim_ucsim::MGetFreq ( void  )

overridevirtual

board microcontroller get frequency

Implements board.

MGetInstClockFreq()

float bsim_ucsim::MGetInstClockFreq ( void  )

overridevirtual

board microcontroller get cpu internal clock (in PIC frequency/4)

Implements board.

MGetPin()

unsigned char bsim_ucsim::MGetPin ( int  pin )

overridevirtual

board microcontroller get digital pin value

Implements board.

MGetPinCount()

int bsim_ucsim::MGetPinCount ( void  )

overridevirtual

board microcontroller pin count

Implements board.

MGetPinName()

std::string bsim_ucsim::MGetPinName ( int  pin )

overridevirtual

board microcontroller pin name

Implements board.

Here is the call graph for this function:

MGetPinsValues()

const picpin * bsim_ucsim::MGetPinsValues ( void  )

overridevirtual

board microcontroller get all pins list struct

Implements board.

MGetVCC()

float bsim_ucsim::MGetVCC ( void  )

overridevirtual

board microcontroller get vcc

Implements board.

MInit()

int bsim_ucsim::MInit ( const char *  processor, const char *  fname, float  freq  )

overridevirtual

board microcontroller init

Implements board.

Reimplemented in cboard_uCboard.

Here is the call graph for this function:

MReset()

void bsim_ucsim::MReset ( int  flags )

overridevirtual

board microcontroller reset

Implements board.

MSetAPin()

void bsim_ucsim::MSetAPin ( int  pin, float  value  )

overridevirtual

board microcontroller set analog pin

Implements board.

MSetFreq()

void bsim_ucsim::MSetFreq ( float  freq )

overridevirtual

board microcontroller set frequency

Implements board.

Here is the call graph for this function:

MSetPin()

void bsim_ucsim::MSetPin ( int  pin, unsigned char  value  )

overridevirtual

board microcontroller set digital pin

Implements board.

MSetPinDOV()

void bsim_ucsim::MSetPinDOV ( int  pin, unsigned char  ovalue  )

overridevirtual

board microcontroller set Default Open Value (external pull)

Implements board.

MSetSerial()

void bsim_ucsim::MSetSerial ( const char *  port )

overridevirtual

Set serial port name to use.

Implements board.

MSetVCC()

void bsim_ucsim::MSetVCC ( float  vcc )

overridevirtual

board microcontroller set vcc

Implements board.

MStep()

void bsim_ucsim::MStep ( void  )

overridevirtual

board microcontroller run one step

Implements board.

Here is the call graph for this function:

MStepResume()

void bsim_ucsim::MStepResume ( void  )

overridevirtual

board microcontroller run one or two steps to resume instruction

Implements board.

---

The documentation for this class was generated from the following files:

• src/boards/bsim_ucsim.h
• src/boards/bsim_ucsim.cc